含内热源球壳的复合传热特性及其表面温度均匀性研究

应用计算流体动力学方法,对带内热源的空腔球壳所涉及的含导热、自然对流和辐射换热的耦合传热问题进行了数值建模,得到了球壳空腔内、外侧流体的温度场、速度场。在数值模拟基础上,提出并试验验证了能有效提高球壳外表面温度均匀性的电加热绳方案。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

两种中温固化胶粘剂的剪切疲劳和蠕变性能研究

研究了SY 2 4B胶膜和SY H2糊状胶粘剂的剪切疲劳和蠕变性能。SY 2 4B胶膜和SY H2糊状胶粘剂同为中温固化的结构胶粘剂 ,SY 2 4B胶膜采用橡胶增韧 ,SY H2糊状胶粘剂采用热塑性树脂增韧。SY 2 4B胶膜虽然具有优异的韧性 ,但SY H2糊状胶粘剂的剪切疲劳和蠕变性能优于SY 2 4B胶膜 ,这与增韧剂种类与胶层厚度有一定关系。温度、应力和时间也是影响蠕变量的重要因素     

光干涉技术在纳米精度测量中的应用及发展

分析了几种应用于纳米精度测量的光干涉技术工作原理、应用限制及研究现状,包括X射线干涉仪、干涉仪及激光外差干涉技术。     

某重型燃气轮机放气活门及排气管路的改进设计

针对某重型燃气轮机放气系统放气活门在结构设计上存在的问题,经过分析和论证,提出了改进方案,通过计算验证了该方案可以实施。     

飞机座舱有机玻璃机械加工应力测量方法研究

 通过实验研究了有机玻璃由于机械加工所产生的双折射条纹的性质及其与机械加工应力的关系;建立了一种定量测定和无损检测平板有机玻璃和飞机座舱有机玻璃件机械加工应力的新方法:用光弹性仪可以测得与双折射有关的干涉条纹,则可确定加工应力。     

强制偏流喷管的数值仿真

采用薄层Ｎ－Ｓ方程成功地求解了强制流喷管内的三维复杂流场，对通量项和压力项用Ｖａｎ Ｌｅｅｒ发展的矢通量分裂法进行了离散，对离散方程采用线超松弛方法迭代求解，在亚音速与超音速气流共同存在的出口边界分情况进行了处理。计算结果验证了强制偏喷管具有自动补偿外界压力变化的能力，与实验结果基本吻合。     

一种基于模式搜索的大尺寸测量移站坐标转换方法

针对空间大尺寸测量的移站坐标转换，提出了最小二乘坐标转换数学模型和基于模式搜索的参数求解方法，实验证明该方法具有理论正确性和实际可行性。     

高温超导磁悬浮助推缩比试验系统动态测试分析

基于磁悬浮助推技术概念研究方案建立了一套悬浮加速缩比试验系统.从整体缩比模型振动试验出发,主要研究悬浮质量以及悬浮刚度对整体系统动态性能的影响,并在进行缩比单元动态试验结论的基础上,建立试验模型的加速试验动态采集系统,对整体模型进行运行性能试验.在试验基础上提出了提高磁悬浮推进系统运行稳定性的依据,并据此提出相应可行的解决方案设想.通过模型加速试验并采集试验数据定性分析磁浮系统的综合运动性能,以更好地评估系统稳定特性和品质,也为进一步研究磁悬浮助推发射的气动、分离系统稳定性和可靠性提供参考.